PaperActive

Design and Implementation of a Kalman Filter-Infused Algorithm for Tilt Estimation

quality89

Updated 6 h ago · first seen 11 Sept 2026

paper_01M294H3PZ7ZZMNX5SD1EG01QW

Published: 11 Sept 2026; T1 · 6 h ago
arXiv: 2609.00730; T1 · 6 h ago
Category: cs.CV; T1 · 6 h ago

Abstract

Accurate tilt angle estimation is important in many engineering applications, such as robotics, motion tracking, and embedded control systems. However, measurements from low-cost inertial sensors are often degraded by noise and drift. This paper presents a single-axis tilt angle estimation system based on the MPU6050 inertial measurement unit, implemented on an RP2040 microcontroller platform, with sensor fusion achieved through a Kalman filter. The accelerometer provides a direct estimate of tilt angle from gravity but is sensitive to noise and short-term fluctuations. The gyroscope provides smooth angular rate measurements, but integration over time introduces drift. To overcome these limitations, a Kalman filter is used to combine measurements from both sensors, leveraging the long-term stability of the accelerometer and the short-term smoothness of the gyroscope. Both simulation and hardware experiments are performed. In simulation, sensor noise and drift are modeled to evaluate the filter performance under control conditions. In the hardware implementation, real-time MPU6050 data is acquired and processed by the RP2040 platform, and the estimated tilt angle is compared with accelerometer-only and gyroscope-only outputs. The results show that the proposed method effectively reduces noise measurements and suppresses long-term drift while preserving good dynamic response. Overall, the system provides more stable and accurate tilt estimation than either sensor alone, demonstrating a practical and accessible approach for Kalman filter based sensor fusion in embedded application.

Authors 2

Yuehan Ma, Hongji Dai

Specification

Official page: arxiv.org/abs/2609.00730
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh
Arxiv announce type: replace
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh
arXiv id: 2609.00730
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh
Categories: cs.CV, cs.RO, cs.SY, eess.SP, eess.SY
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh
PDF: arxiv.org/pdf/2609.00730
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh
Primary category: cs.CV
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh
Published: 11 Sept 2026
Source:arXiv (Atom API + RSS)T1observed 6 h agohigh

Each value shows its source, tier and observation time. Conflicting claims are kept side by side and flagged — never averaged. How AI Atlas records facts →

Provenance

Attributed facts

Source tiers

T19

Freshest observation

6 h ago

Conflicts

None

As of

Rewind the record: see this entity's attributes exactly as AI Atlas knew them on a given day.

Claim history

9 claims · 9 properties

Official pageofficial_url1

Claim history for Official page
Value	Valid from → to	Status	Source	Confidence	Extractor
https://arxiv.org/abs/2609.00730	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Abstractabstract1

Claim history for Abstract
Value	Valid from → to	Status	Source	Confidence	Extractor
Accurate tilt angle estimation is important in many engineering applications, such as robotics, motion tracking, and embedded control systems. However, measurements from low-cost inertial sensors are often degraded by noise and drift. This paper presents a single-axis tilt angle estimation system based on the MPU6050 inertial measurement unit, implemented on an RP2040 microcontroller platform, with sensor fusion achieved through a Kalman filter. The accelerometer provides a direct estimate of tilt angle from gravity but is sensitive to noise and short-term fluctuations. The gyroscope provides smooth angular rate measurements, but integration over time introduces drift. To overcome these limitations, a Kalman filter is used to combine measurements from both sensors, leveraging the long-term stability of the accelerometer and the short-term smoothness of the gyroscope. Both simulation and hardware experiments are performed. In simulation, sensor noise and drift are modeled to evaluate the filter performance under control conditions. In the hardware implementation, real-time MPU6050 data is acquired and processed by the RP2040 platform, and the estimated tilt angle is compared with accelerometer-only and gyroscope-only outputs. The results show that the proposed method effectively reduces noise measurements and suppresses long-term drift while preserving good dynamic response. Overall, the system provides more stable and accurate tilt estimation than either sensor alone, demonstrating a practical and accessible approach for Kalman filter based sensor fusion in embedded application.	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Arxiv announce typearxiv_announce_type1

Claim history for Arxiv announce type
Value	Valid from → to	Status	Source	Confidence	Extractor
replace	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

arXiv idarxiv_id1

Claim history for arXiv id
Value	Valid from → to	Status	Source	Confidence	Extractor
2609.00730	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Authorsauthors1

Claim history for Authors
Value	Valid from → to	Status	Source	Confidence	Extractor
Yuehan Ma, Hongji Dai	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Categoriescategories1

Claim history for Categories
Value	Valid from → to	Status	Source	Confidence	Extractor
cs.CV, cs.RO, cs.SY, eess.SP, eess.SY	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

PDFpdf_url1

Claim history for PDF
Value	Valid from → to	Status	Source	Confidence	Extractor
https://arxiv.org/pdf/2609.00730	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Primary categoryprimary_category1

Claim history for Primary category
Value	Valid from → to	Status	Source	Confidence	Extractor
cs.CV	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Publishedpublished_at1

Claim history for Published
Value	Valid from → to	Status	Source	Confidence	Extractor
11 Sept 2026	11 Sept 2026 21:03 UTC → current	current	arXiv (Atom API + RSS)T1	high	deterministic

Claims are temporal and append-only: a new observation closes the previous claim (valid_to) instead of overwriting it. Conflicting claims from different sources are kept side by side and flagged — never averaged. Methodology →

Source documents
Source	Document	Type	Tier	Last observed	Snapshots
arXiv (Atom API + RSS)	rss.arxiv.org/rss/cs.CV	feed	T1· Official	6 h ago	1

Tier 1 = official/primary, 2 = quality secondary, 3 = community, 4 = unverified. Every snapshot is archived; see all sources and the methodology.