Design and Implementation of a Kalman Filter-Infused Algorithm for Tilt Estimation
Updated 51 min ago · first seen 11 Sept 2026
paper_01M294H3PZ7ZZMNX5SD1EG01QW
- Published
- 11 Sept 2026
- T1 · 51 min ago
- arXiv
- 2609.00730
- T1 · 51 min ago
- Category
- cs.CV
- T1 · 51 min ago
Abstract
Accurate tilt angle estimation is important in many engineering applications, such as robotics, motion tracking, and embedded control systems. However, measurements from low-cost inertial sensors are often degraded by noise and drift. This paper presents a single-axis tilt angle estimation system based on the MPU6050 inertial measurement unit, implemented on an RP2040 microcontroller platform, with sensor fusion achieved through a Kalman filter. The accelerometer provides a direct estimate of tilt angle from gravity but is sensitive to noise and short-term fluctuations. The gyroscope provides smooth angular rate measurements, but integration over time introduces drift. To overcome these limitations, a Kalman filter is used to combine measurements from both sensors, leveraging the long-term stability of the accelerometer and the short-term smoothness of the gyroscope. Both simulation and hardware experiments are performed. In simulation, sensor noise and drift are modeled to evaluate the filter performance under control conditions. In the hardware implementation, real-time MPU6050 data is acquired and processed by the RP2040 platform, and the estimated tilt angle is compared with accelerometer-only and gyroscope-only outputs. The results show that the proposed method effectively reduces noise measurements and suppresses long-term drift while preserving good dynamic response. Overall, the system provides more stable and accurate tilt estimation than either sensor alone, demonstrating a practical and accessible approach for Kalman filter based sensor fusion in embedded application.
Authors 2
Yuehan Ma, Hongji Dai
Specification
- Official page
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
- Arxiv announce type
- replace
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
- arXiv id
- 2609.00730
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
- Categories
- cs.CV, cs.RO, cs.SY, eess.SP, eess.SY
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
- Primary category
- cs.CV
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
- Published
- 11 Sept 2026
Source:arXiv (Atom API + RSS)T1observed 51 min agohigh
Each value shows its source, tier and observation time. Conflicting claims are kept side by side and flagged — never averaged. How AI Atlas records facts →
Provenance
Attributed facts
9
Source tiers
T19
Freshest observation
51 min ago
Conflicts
None
No models linked to this paper yet.
- Authors
- Yuehan Ma, Hongji Dai
As of
Rewind the record: see this entity's attributes exactly as AI Atlas knew them on a given day.
Claim history
Official pageofficial_url1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| https://arxiv.org/abs/2609.00730 | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
Abstractabstract1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| Accurate tilt angle estimation is important in many engineering applications, such as robotics, motion tracking, and embedded control systems. However, measurements from low-cost inertial sensors are often degraded by noise and drift. This paper presents a single-axis tilt angle estimation system based on the MPU6050 inertial measurement unit, implemented on an RP2040 microcontroller platform, with sensor fusion achieved through a Kalman filter. The accelerometer provides a direct estimate of tilt angle from gravity but is sensitive to noise and short-term fluctuations. The gyroscope provides smooth angular rate measurements, but integration over time introduces drift. To overcome these limitations, a Kalman filter is used to combine measurements from both sensors, leveraging the long-term stability of the accelerometer and the short-term smoothness of the gyroscope. Both simulation and hardware experiments are performed. In simulation, sensor noise and drift are modeled to evaluate the filter performance under control conditions. In the hardware implementation, real-time MPU6050 data is acquired and processed by the RP2040 platform, and the estimated tilt angle is compared with accelerometer-only and gyroscope-only outputs. The results show that the proposed method effectively reduces noise measurements and suppresses long-term drift while preserving good dynamic response. Overall, the system provides more stable and accurate tilt estimation than either sensor alone, demonstrating a practical and accessible approach for Kalman filter based sensor fusion in embedded application. | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
Arxiv announce typearxiv_announce_type1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| replace | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
arXiv idarxiv_id1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| 2609.00730 | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
Categoriescategories1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| cs.CV, cs.RO, cs.SY, eess.SP, eess.SY | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
PDFpdf_url1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| https://arxiv.org/pdf/2609.00730 | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
Primary categoryprimary_category1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| cs.CV | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
Publishedpublished_at1
| Value | Valid from → to | Status | Source | Confidence | Extractor |
|---|---|---|---|---|---|
| 11 Sept 2026 | → current | current | arXiv (Atom API + RSS)T1 | high | deterministic |
Claims are temporal and append-only: a new observation closes the previous claim (valid_to) instead of overwriting it. Conflicting claims from different sources are kept side by side and flagged — never averaged. Methodology →
New paper: Design and Implementation of a Kalman Filter-Infused Algorithm for Tilt Estimation
arxiv
| Source | Document | Type | Tier | Last observed | Snapshots |
|---|---|---|---|---|---|
| arXiv (Atom API + RSS) | rss.arxiv.org/rss/cs.CV | feed | T1· Official | 51 min ago | 1 |
Tier 1 = official/primary, 2 = quality secondary, 3 = community, 4 = unverified. Every snapshot is archived; see all sources and the methodology.